Humbrol Enamel No41 - 14ml

A solvent-based enamel paint with a Gloss finish Usage A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available. Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability). Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol Enamel No91 - 14ml

A solvent-based enamel paint with a Matt finish Usage A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available. Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability). Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.

Red Enamel Bread Bin Retro Canister Jar Stainless

Retro Style Non Slip Blue Gloss Enamel Steel Bread Bin

Streamline Bread Bin -Clay

It's the same bestselling design - but this time in a wonderful new colour.

Our Streamline Bread Bin in our soft & subtle Clay will compliment practically any kitchen colour scheme.

Humbrol 14ml Satin Dark Green enamel paint # 195

A solvent-based enamel paint with a satin finish Usage: A solvent-based fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt Satin Gloss Metallic Metalcote and Clear finishes are available. Substrate: A wide range of surfaces including most plastics wood glass ceramics metal cardboard sealed plaster sealed hardboard and more (always check on a small test area to check suitability). Application: Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time: Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage: A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean: Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is perminant once dry.

Humbrol Enamel No31 - 14ml

A solvent-based enamel paint with a matt finish Usage A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available. Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability). Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol Enamel No224 - 14ml

A solvent-based enamel paint with a Metallic finish Usage A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available. Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability). Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.

Enamel Tea Canister Silver Lid

Humbrol Enamel No196 - 14ml

No1 Light Grey 196 14ml - A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.

Humbrol Enamel Paint No 104 Oxford Blue - 14ml

A solvent-based enamel paint with a matt finish. Usage: A solvent-based fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt Satin Gloss Metallic Metalcote and Clear finishes are available. Substrate: A wide range of surfaces including most plastics wood glass ceramics metal cardboard sealed plaster sealed hardboard and more (always check on a small test area to check suitability). Application: Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time: Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage: A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean: Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is perminant once dry.

Humbrol Enamel Paint No 5 Dark Grey - 14ml

Humbrol Enamel Paint No 5 Dark Grey

Humbrol 14ml Gloss Crimson enamel paint # 20

A solvent-based enamel paint with a gloss finish. Usage: A solvent-based fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt Satin Gloss Metallic Metalcote and Clear finishes are available. Substrate: A wide range of surfaces including most plastics wood glass ceramics metal cardboard sealed plaster sealedhardboard and more (always check on a small test area to check suitability). Application: Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time: Gloss: 1-2 hours touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage: A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean: Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is perminant once dry.

Humbrol Enamel No99 - 14ml

No1 Matt Lemon 99 14ml - A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.

Humbrol Enamel No66 - 14ml

No1 Matt Olive Drab 66 14ml - A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.

Humbrol Enamel No126 - 14ml

No1 S Us Med.Grey 126 14ml - A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.

RETRO - Enamel Storage Jar / Caddy / Tin - SUGAR - Red

Beautifully designed sugar jar with modern lettering on the side. Made from metal with bright red enamel coating and polished top.